By July 19, 2017 August 23rd, 2017 No Comments


Humidity is often the most common term used when evaluating moisture issues.


Relative humidity is defined as the ratio of the actual amount of water vapor present in a volume of air at a given temperature to the maximum amount that the air could hold at that temperature, expressed as a percentage.


While it is an important measure, it can sometimes be misleading. The biggest problem with measuring humidity is that it is relative humidity (rH). Most people forget about the fact that it is relative to the temperature. The warmer the air, the more water vapor the air can hold.


So, as an example, if all other things are equal, which one do you think has more water vapor in the air?

  • Air Mass A: Air with 45% relative humidity at a temperature of 95 degrees F.
  • Air Mass B: Air with 90% relative humidity at a temperature of 70 degrees F.

The answer is Air Mass A. Even though the relative humidity is only 45%, the air is so much warmer that it is holding more water vapor. This is not obvious but very important in understanding proper ventilation.


This particular example applies well to crawlspace ventilation. In the summer, most crawlspaces remain cooler and around 70 degrees F and in many climates the outside air can be around 90 degrees F. This is where many people mistakenly think that the 45% rH air from Air Mass A would be “better” than the 90% rH from Air Mass B just because the relative humidity is so much lower. However, remember that in this scenario, Air Mass B actually has drier air. It is not beneficial to ventilate with the outside air from Air Mass A as it would actually be bringing in wetter air from the outside. This hotter air with more moisture will cool off when it is in crawlspace causing the relative humidity to go up further than it was before.


Because Relative Humidity is not the sole measure that should be used for proper ventilation, the ATMOX Systems use Dew Point. Please read webpage on Dew Point to understand this critical difference.



I hope this information helps you and stay tuned for more to come.

Call us for a Free Quote at 727-224-0837 and Remember we service the following areas

Hudson Home Inspection, West chase Home Inspection, Tampa Home Inspection, St. Petersburg Home Inspection, Palm Harbor Home Inspection, Tarpon Springs Home Inspection, Safety Harbor Home Inspection, Clearwater Home Inspection, Dunedin Home Inspection, Largo Home Inspection,

Mike Potts

Mike Potts

After graduating from Michigan State University with a degree in structural engineering, Mike moved to Tampa Bay and soon discovered a need in the community for trained, professional inspectors. Using his training in the field, Mike established Affordable Inspections, Inc. in 1992 and began offering his services to the public – inspecting commercial and residential properties. Taking on not just inspections, but full-on construction projects, Mike made a name for himself as an expert in structural engineering and worked on large commercial buildings in Tampa Bay and Clearwater.