ATMOX Systems operate on the premise of using only drier air from the outside to ventilate the attic or crawl space. How does the system know if the air is drier outside? The webpage on Humidity explains how relative humidity alone cannot be used to determine ventilation. The ATMOX System uses a Dew Point comparison.
Dew Point is the temperature where any air mass when cooled to that temperature reaches 100% humidity.
Air with a lower dew point is drier than air with a higher dew point. The ATMOX System uses its sensors to measure both temperature and relative humidity both outside and inside the crawlspace or attic. These measurements allow ATMOX to calculate the dew point in each location and make a true comparison of the air masses.
I hope this information helps you and stay tuned for more to come.
Call us for a Free Quote at 727-224-0837 and Remember we service the following areas
Hudson Home Inspection, West chase Home Inspection, Tampa Home Inspection, St. Petersburg Home Inspection, Palm Harbor Home Inspection, Tarpon Springs Home Inspection, Safety Harbor Home Inspection, Clearwater Home Inspection, Dunedin Home Inspection, Largo Home Inspection,